ㆍVario with altitude signals and 5 climb/drop signals each
ㆍAdditional warning thresholds for minimum altitude, maximum altitude, climb/drop speed in two stages
ㆍAltitude display and storage of minimum and maximum altitude
ㆍGPS with distance measurement, route measurement, speed display, display of flight direction and coordinates
ㆍWarning time can be set to: OFF, 5, 10, 15, 20, 25, 30 seconds, always
ㆍWarning repeat time can be set to: always, 1, 2, 3, 4, 5 minutes, once
ㆍThe GPS/Vario sensor can be connected directly to the telemetry output of the receiver

Important Note when using the modules 33600, 33601, 33610, 33611 and 33620:

Do not carry out any programming work on the sensors while the model is flying, otherwise there is a real risk that your model will fly out of control while you are not concentrating on it!
If your model is fitted with two or more receivers, it is absolutely essential that you do not carry out programming work during a flight, as this can alter the settings in the receivers to which no telemetry equipment is connected; in the worst case this could result in the model crashing! For this reason always carry out programming on the ground, and check that only the receiver with connected sensors is powered on.

Vario technical data:

ㆍAltitude measurement: -500 ... +3000 m
ㆍResolution: 0.1m
ㆍSensitivity of Vario: 0.5 m / 3s, 1 m / 3 s, 0,5 m / s, 1 m / 1 s, 3 m / s per ton programmable
ㆍCalculation of mean: 4 - 20 measurements per measured value can be programmed